Part #: NDPL-09T-V
Part Category: Switches
Manufacturer: APEM Components, Inc.
Description: Piano Dip Switch, 9 Switches, SPST, Off-on, Latched, 0.025A, 24VDC, 18 PCB Hole Cnt, Solder Terminal, Through Hole-right Angle
Manufacturer: APEM Components, Inc.
Description: Piano Dip Switch, 9 Switches, SPST, Off-on, Latched, 0.025A, 24VDC, 18 PCB Hole Cnt, Solder Terminal, Through Hole-right Angle
NDPL-09T-V SPECIFICATIONS
| REACH Compliant | Yes |
| EU RoHS Compliant | Yes |
| Status | Active |
| Switch Type | PIANO DIP SWITCH |
| Actuator Angle | 25.0 deg |
| Actuator Length | 0.07 inch |
| Actuator Material | POLYBUTYLENE TEREPHTHALATE |
| Actuator Type | PIANO |
| Body Breadth | 10.2 mm |
| Body Height | 9.9 mm |
| Body Length or Diameter | 24.22 mm |
| Center Contact Plating | GOLD |
| Contact Current(DC)-Max | 0.025 A |
| Contact DC Max Rating R Load | 0.025A@24VDC |
| Contact Function | OFF-ON |
| Contact Resistance | 0.05 ohm |
| Contact Voltage(DC)-Max | 24.0 V |
| Electrical Life | 2000.0 Cycle(s) |
| End Contact Material | BRASS |
| End Contact Plating | GOLD |
| Housing Material | POLYBUTYLENE TEREPHTHALATE |
| Insulation Resistance | 1.0E8 ohm |
| Insulator Material | POLYBUTYLENE TEREPHTHALATE |
| JESD-609 Code | e4 |
| Mounting Feature | THROUGH HOLE-RIGHT ANGLE |
| Number of Switch Sections | 9.0 |
| Operating Temperature-Min | -20.0 Cel |
| Operating Temperature-Max | 70.0 Cel |
| Packing Method | TUBE |
| PCB Hole Count | 18.0 |
| Sealing | TOP TAPE SEALED |
| Switch Action | LATCHED |
| Switch Function | SPST |
| Terminal Finish | Gold (Au) |
| Terminal Length | 0.12 inch |
| Terminal Material | BRASS |
| Termination Type | SOLDER |
| Additional Feature | SPRAY WASHABLE |
